We are all familiar with the trigonometry textbook problem, the angle of
elevation to the top of a building from a point
200 feet from...Find the height
of the building. Here we describe a trigonometric method that not only measures
heights of points on a building, but widths and depths of those points.
The procedure involves readings with a theodolite, and computations of the readings
by a computer. The method is suitable for sighting from sloping ground. It
will work with walls that are leaning out of plumb, have offsets, are curved, or have
projecting elements, like sills or cornices. The method was developed for the
purpose of measuring historic monuments, where the erection of scaffolding to
accomodate hand measuring is often impossible. This method also provides a
low-cost alternative to stereogrammetric procedures, such as that used to
measure
Independence Hall in Philadelphia.
The Method
- Study of facade and preparation of preliminary drawings to determine target points.
- Determination of a base line, and establishment of two theodolite positions.
- Set the theodolite at position A, sight a point T1 on the wall, and sight a plumb line over theodolite position B, setting horizontal scale to zero.
- Sight each target point, recording horizontal angle and vertical angle.
- Set the theodolite at position B, sight a point in line T2 vertically with T1, and measure the vertical distance between them.
- Repeat step 4.
- Enter all measurements into the computer spreadsheet and print out the x, y and z coordinate of each target point. Make a final scale drawing.
The method was tested by taking measurements of the facade of Green Academic Center at Vermont Technical College. Two equations are used to calculate the y coordinates, and the comparison of the two results provides a way to control the accuracy of the method. It appears that, with moderate care, accuracies within .5% are easily obtained. Theoretically, better accuracy may be obtained by taking a readings from a third theodolite setup point.
 |
 |